Cat 6 UTP 1 to 2 Splitter

The Cat 6 UTP 1 to 2 Splitter is a passive Y-splitter that lets one Cat6 Ethernet cable feed two separate devices at the same time, without needing a switch or any power source. It works by dividing the cable’s 8-wire pairs into two independent 4-wire connections, so each device gets its own dedicated data path over the same physical cable run rather than simply alternating access. Because each connection uses only 4 wires instead of the full 8, speeds are capped at 10/100 Mbps per device rather than full Gigabit, which is an important trade-off to understand before installing. This splitter genuinely allows two devices to connect simultaneously, unlike the simpler RJ45 coupler that only lets one port work at a time — but it requires two splitter units, one installed at each end of the cable run, to function correctly. It’s a practical fix for situations like sharing one network drop between a PC and an IP phone, or two nearby computers, in a Nairobi apartment, small shop, or temporary office setup where running a second cable or adding a switch isn’t worth the cost or effort. Its shielded contacts and durable housing help resist interference along the split connection, and installation is fully plug-and-play with no configuration required.

Key Features

• True 1-in, 2-out splitting, allowing two devices to connect to the network simultaneously
• Passive design — no power required, fully plug-and-play
• Splits Cat6 8-wire pairs into two 4-wire connections, one per device
• 10/100 Mbps per device, a necessary trade-off for running two connections over one cable
• Requires two splitter units (one at each end of the cable run) to function correctly

Technical Specifications

Best Suited For

• Home users sharing one network drop, connecting a PC and an IP phone or smart TV at the same time
• Small offices and shops needing two connections from one cable, without the cost of running extra cabling
• Temporary or budget setups where 100Mbps per device is sufficient and simultaneous access matters more than full Gigabit speed