Siemon Cat 6 Patch Cord 5M

Siemon Cat 6 Patch Cord — 5 Metre

The Siemon Cat 6 Patch Cord (5 metre) is a factory-terminated, performance-verified copper patch cable designed for structured cabling environments. It connects network switches, patch panels, and end devices within equipment racks, server rooms, and open-plan office cable management systems. Furthermore, as a factory-assembled component, it delivers consistent, tested performance that field-terminated patch cords cannot guarantee at scale.

The 5-metre length makes the Siemon Cat 6 Patch Cord suitable for mid-length equipment room runs — long enough to route neatly through cable management arms and across rack bays, without the excess slack associated with longer leads. When used as part of a complete Siemon Cat 6 channel alongside Z-MAX or MAX keystone jacks and horizontal cable, the patch cord contributes to a warranted end-to-end channel compliant with ANSI/TIA-568.2-D and ISO/IEC 11801 Class E.

Performance and Bandwidth

The Siemon Cat 6 Patch Cord is rated to 250 MHz, in line with the Cat 6 standard. It supports Gigabit Ethernet (1000BASE-T) across the full channel and contributes to 10GBASE-T channel performance over shorter runs when paired with Cat 6 horizontal cabling. Additionally, the cord meets the enhanced electrical performance requirements of ANSI/TIA-568.2-D for patch cord components — including insertion loss, NEXT, and return loss limits that are more stringent than those applied to horizontal cable alone.

Factory termination is a key performance advantage. Each Siemon Cat 6 Patch Cord is individually tested at the point of manufacture to verify compliance with Cat 6 channel contribution parameters. As a result, installers can deploy these cords with confidence that performance will not vary between units in the same batch.

Construction and Connectors

The Siemon Cat 6 Patch Cord uses 26 AWG stranded bare copper conductors across four twisted pairs. Stranded construction provides the flexibility needed for frequent connection and disconnection cycles — making it more suitable for patch panel and equipment room applications than solid-core cable, which is intended for fixed horizontal runs.

Each end is terminated with a standard RJ45 plug. Siemon’s plug design incorporates a snag-resistant boot that protects the locking tab during routing through cable management systems and tight bundle runs. This reduces the incidence of broken locking tabs — a common failure point in high-density patching environments where cords are regularly moved and re-routed.

The cable jacket is available in PVC formulation as standard, with LSZH variants available for environments where flame spread and smoke toxicity are regulated. The 5-metre cord is available across a range of jacket colours, enabling colour-coded patching schemes that simplify VLAN identification, circuit tracing, and moves-adds-changes (MAC) work.

Channel Integration

The Siemon Cat 6 Patch Cord is designed to function as the equipment cord and work area cord components within a complete TIA-568.2-D Cat 6 channel. A standard horizontal channel consists of:

• Up to 90 metres of Cat 6 horizontal cable
• Two patch cords (equipment room and work area) with a combined maximum length of 10 metres
• Termination at both ends via Cat 6 keystone jacks or panel ports

Within this architecture, the 5-metre Siemon Cat 6 Patch Cord occupies one of the two patch cord positions. Consequently, it must be paired with a work area cord of 5 metres or less to remain within the 10-metre combined patch cord allowance. When the full channel uses matched Siemon components, it qualifies for Siemon’s end-to-end channel performance warranty.

Supported Applications

The Siemon Cat 6 Patch Cord supports the following applications within a compliant Cat 6 channel:

• 1000BASE-T — Gigabit Ethernet (IEEE 802.3ab)
• 100BASE-TX — Fast Ethernet
• 10GBASE-T — 10 Gigabit Ethernet (channel-dependent, up to ~55m horizontal run)
• PoE and PoE+ — Power over Ethernet up to 30W (IEEE 802.3at)
• PoE++ — Up to 90W (IEEE 802.3bt) with appropriate channel design
• VoIP — IP telephony over structured cabling
• IP Surveillance — Camera backhaul within structured cabling channels

Ideal Users

• Network and IT Infrastructure Technicians — The factory-tested construction eliminates the performance variability of field-terminated patch cords. For technicians managing high-density patch panels across multiple racks, consistent plug performance reduces fault-finding time associated with poorly terminated cords.
• Data Centre and Server Room Operators — The 5-metre length suits cross-rack and top-of-rack patching where cable runs must traverse cable management arms, horizontal managers, and vertical risers while maintaining a tidy, low-slack appearance. Colour-coded jacket options support structured cable identification schemes.
• Structured Cabling Contractors — Deploying Siemon patch cords alongside Siemon horizontal cable and keystone jacks completes the matched-component channel required for Siemon’s end-to-end warranty. This is a differentiator in specification-driven and tender projects where warranty documentation is part of project handover.
• Facilities and Building Management Teams — The snag-resistant boot reduces damage during routine MACs, lowering the replacement frequency in environments where patch cords are regularly moved. Colour coding by cord simplifies circuit identification without requiring label systems.
• Education and Healthcare IT Departments — PoE++ compatibility (IEEE 802.3bt) supports high-power connected devices — including 802.11ax access points, IP cameras, and digital signage — within a Cat 6 structured cabling plant, without requiring separate power cabling to each device.

Cable Specifications

Performance Specifications

Physical Specifications

Channel Integration Parameters

Certifications